Product overview

It is reactive Self-adhesive asphalt Membrane, it contains special active agents and anti-aging agent, and could be constructed on moisture substrate, it could have reaction with grout, and could be fully sticky with substrate to successfully avoid channeling water problem. The construction method needs no fire and have excellent performance.

Feature

1.Low requirements for the substrate, could construct on moisture or unleveled base, no need primer or pre-treatment, could save project time

2.Could be fully sticky with substrate, and will not separate under long-term immersion environment, could effectively avoid channeling water problem

3.No need fire, safe application, easy to use

4.Seldom be affected by rainy weather, could save project time.

5.Could effectively avoid overlap risk

Application

Wet-laid waterproofing membranes are used for non-exposed waterproofing projects, basement, roofing, tank, etc. If need to be exposed, could add aluminum.

Construction Guide

1.Clean the substrate, no floating sand, and other unsuitable things

2.Make the substrate a little wet, but no clear water

3.Prepare the cement grout, cement:water=1-2:1, add 0.5% bonding powder.

4.Apply the grout on the substrate, around 0.5mm thickness

5.Spread the membrane on the grout, and make the membrane smooth, and must exclude the air between grout and membrane

6.Wait until the grout become paste and not flowing(about 10mins), then remove the overlap PE film, let membranes bond to each other, be cautious not to pollute the overlap parts.